Resetting Semi-Passive Stiffness Damper (RSPSD) [ID 12015]

Description:

Overview

One way to reduce the devastating fatalities and economic losses of earthquakes is to minimize the vulnerability of civil infrastructure. This can be achieved through infrastructure strengthening and/or implementation of structural control. Structural control can be broadly characterized into three categories: active, passive, and semi-active. Of the three, semi-active control has recently received increased attention due to its adaptability, minimal power requirement, and inherent stability. The Resetting Semi-Active Stiffness Damper (RSASD) has proven effective in reducing the response of structures in the presence of near-field ground motions. The device, however, could be much simpler and produce similar results as demonstrated by the RSPSD.

The RSPSD utilizes a primarily mechanical system that achieves resetting without the need for a complex feedback control system. The mechanical system replaces the encoder and micro-controller components of the RSASD, thereby enhancing the reliability of the damper during a seismic event.

Commercial Application

Semi-Passive device installed on structure to add/remove stiffness to the structure in times of near-field vibrations/earthquakes

Also yields potential for use in other fields involving shock absorption including but not limited to automobile suspension, aircraft landing gear, and weapons recoil reduction

Benefits

Semi-passive design reaps benefits of both active and passive systems, enhancing reliability while maintaining stability during earthquakes

Simplicity of system reduces risk of system failure that may occur in sensors, etc. with Semi-active system

Comparable effectiveness to semi-active system with a simpler design at a lower cost•

Can be implemented on a wide variety of structures as well as on non-structural systems subject to shock-type disturbances

 

Printable Overview

Issued Patents:

9,598,862

Published Patent Applications:

2017/0191543 A1 US

2016-505738,A Japan

 

Patent Information:
Category(s):
Manufacturing
For Information, Contact:
Mark Foley
Technology and Commercialization Manager
Ohio University
foleym@ohio.edu
Inventors:
Ken Walsh
Keywords: